Release time：2021-01-08 16:34:29 ： Source：未知
| Lubricating Oil Filling Data | ||||||||
| Machine | Model |
Lubricating oil （grease） |
Main Property | Lubricating Amount | Frequency | Attention | Brand | Remarks |
| JAW CRUSHER | <=PE600x900 |
Winter：Mobil XHP222 Summer：Mobil XHP223 （Extreme pressure lithium lubricating grease ） |
1.Appearance:dark blue/grey-black paste 2.Dropping point ≤280° 3.Anti-corrosion property:ASTM D 1743 level |
500g per bearing | Per shift | Pay attention to check the oil hole/oilling amount/multi-point oiling machine condition |
Mobil/Shell/ESSO/BP,etc |
1 shift=8-10 hour |
| PE750x1060 | ||||||||
|
PE900x1200 and bigger model |
700g per bearing | |||||||
| Impact crusher | PE Series |
Winter：Mobil XHP222 Summer：Mobil XHP223 （Extreme pressure lithium lubricating grease ） |
1.Appearance:dark blue/grey-black paste 2.Dropping point ≤280° 3.Anti-corrosion property:ASTM D 1743 level |
600g per bearing | Per shift | Pay attention to check the oil hole/oilling amount/multi-point oiling machine condition | Mobil/Shell/ESSO/BP,etc | |
| PEH Series | 600g per bearing | |||||||
| Vibrating screen | All Series |
Winter：Mobil XHP222 Summer：Mobil XHP223 （Extreme pressure lithium lubricating grease ） |
600g per bearing | Per shift | Pay attention to check the oil hole/oilling amount/multi-point oiling machine condition | Mobil/Shell/ESSO/BP,etc | ||
| Belt conveyor | All Series |
Winter：Mobil XHP222 Summer：Mobil XHP224 （Extreme pressure lithium lubricating grease ） |
According to usage amount | During overhaul | Pay attention to check the oil hole/oilling amount/multi-point oiling machine condition | Mobil/Shell/ESSO/BP,etc | ||
| Feeder | All Series |
1.Mobil 600XP 68#HEAVY DUTY INDUSTRIAL GEAR OIL 2.Other oil of same type |
50-70KG | Built-in splash lubrication | Pay attention to check the oil hole/oilling amount/multi-point oiling machine condition | Mobil/Shell/ESSO/BP,etc | Change every 3-6months | |
| Cone crusher | SC75 |
1.Mobil 600XPHEAVY DUTY INDUSTRIAL GEAR OIL 2.Shell S4GX level 3.Extreme heat place:220#。Hot climate:150#，Other area:use150# in summer ，100# in winter. |
1.appearance:amber color,some brand close to red,bright、clear、no obviously strong smell. 2.Kinematic viscosity index（40°C）100#：95-105；150#：145-155 3.Pour point：<=-23℃ 4.Flash point：>=230℃ 5.LWI:kgf 47-48 |
500KG |
1.Generally, oil should be checked and changed 3 months after official operation. 2.Then, check oil condition every week, make sure the oil in good condition and change oil every season or every 6 months. |
1.Make sure the oil is Authentic with original packing，avoid adulterate oil。 2.Suggested amount , there might be remainder and should be well preserved for future use. |
Mobil/Shell/ESSO/BP,etc | |
| SC160 | 650KG | |||||||
| SC240 | 700-800KG | |||||||
| SC400 | 700-801KG | |||||||
| MC200 | 500KG | |||||||
| MC315 | 500KG | |||||||
| SH Series | 500KG | |||||||
| Hydraulic station | Same type of Mobil,Shell,Esso,etc |
1.Appearance:red or light yellow,bright,clear，low viscosity 2.Viscosity index（40℃）30-50。 3.Pour point：-45℃ 4.Flash point：245℃ |
60-170KG | One year | Mobil/Shell/ESSO/BP,etc | |||
| Sand Machine | All Series | Same type of Mobil,Shell,Esso,etc |
1.Appearance:red or light yellow,bright,clear，low viscosity 2.Viscosity index（40℃）30-50。 3.Pour point：-45℃ 4.Flash point：245℃ |
170KG | One year | Mobil/Shell/ESSO/BP,etc | ||
|
Flash point ：When oil is heated in certain container, it volatilizes flammable gas. Flash point is the temperature of the gas when it ignited instantly. Ignition temperature;Ignition point：the point where oil catch fire under certain condition. Pour point：the lowest temperature(℃) when oil can flow under certain condition. Condensation point:the highest temperature(℃) when cooled oil cannot flow under certain condition. Viscosity Index.：it indicates how fluid changes its viscosity when temperature changes. If the Viscosity Index is high,it means the fluid is less affected by temperature，and it's viscosity is less affected by temperature. |
||||||||
QQ customer service